LASER DESIGNATOR MOUNTS
For fine tuning of your guns laser illuminator or torch with windage and elevation adjustment.
ADJUSTABLE MOUNTS

£26.40p each
With 25mm ring.
Elevation ~ 33mm.
55mm long overall with a 25mm footprint.
Weighs 123 grams.

£26.40p each
With 25mm ring.
Elevation ~ 45mm.
55mm long overall with a 20mm footprint.
Weighs 153 grams.

£28.80p each
With 30mm ring.
Elevation ~ 45mm.
55mm long overall with a 20mm footprint.
Weighs 155 grams.

25mm and 30mm
£26.40p each
With 1 x 25mm ring and 1 x 30mm ring.
Centre to centre ~ 56.5mm.
Weighs 137 grams.

LOW ~ 25mm
£34.80p each
With 1 x 25mm ring and 1 x 35mm QR ring with 30mm and 25mm adapters.
Centre to centre ~ 72mm
Weighs 157 grams.

HIGH ~ 25mm
£34.80p each
With 1 x 25mm ring and 1 x 35mm QR ring with 30mm and 25mm adapters.
Centre to centre ~ 84mm.
Weighs 187 grams.

HIGH ~ 30mm
£37.20p each
With 1 x 30mm ring and 1 x 35mm QR ring with 30mm and 25mm adapters.
Centre to centre ~ 88mm.
Weighs 198 grams.
Please note: check the tightness of the windage adjuster nut, as they can work loose, it seems to have only effected a small amount of the low weaver rail mounts, and usually at inital setup, if loose it can be secure with loctite or similar, or replaced with a 3mm thread nylon lock nut.
Lock nut available at £0.96p if ordered at the same time.
Precision machined aluminium construction.
With large click dials for precise adjustment of windage and elevation.
Black anodised finish.
Especially designed for torches, laser sights / designators / illuminators.
With mount options for 20mm Weaver / Picatinny rails or 25mm / 30mm /35mm scope body fitting.
The 30mm ring comes with a 30mm to 25mm ring adapter.
The 35mm Quick-Release ring comes with a 30mm and 25mm ring adapter.
Please note; that the scope tube mount will not clear scopes with large objective lenses.
It's overall height is 90mm with an elevation of 29mm.
Also available ~ Budget Priced Infrared Illuminators.

Please note;
You need to check first that the scope fitting mounts will clear your scopes front lens.
The overall height or the fixed scope tube mount is 90mm with an elevation of 29mm.



LOOKING FOR AN IR ILLUMINATOR?
We recommend www.scottcountry.co.uk, for night vision and thermal imaging products in the UK.
NEW LOCKING ADJUSTABLE RAIL MOUNT
Condition: New

Precision machined aluminium construction.
Black anodised finish.
45mm long overall with a 45mm footprint.
For 30mm diameters but it comes with a 30mm to 25mm ring adapter for 25mm diameter laser designators / lasers / flashlights.
It's overall height is 66mm with an elevation of 25mm.
The windage and elevation can be locked off on this model.
Offers a quick-release hinged ring with top accessory rail.
Weighs ~ 98 grams.
Please Note: The elevation locking point screw will be directly underneath the installed device, which would need removing to then lock the elevation.

