PARKER HALE ADAPTER
For plain barrel airguns.
PARKER HALE AIRGUN BARREL SILENCER ADAPTER
PHSTAAIRGUN BARREL FITTING ADAPTER
For barrels between 13.5 - 16mm.
£30.00p each
AVAILABLE BY SPECIAL REQUEST
For barrels between 13.5 - 16mm.
£30.00p each
AVAILABLE BY SPECIAL REQUEST
Condition: New, in packaging
Parker Hale adapter that fits plain barrels between 13.5mm to 16mm in diameter.
Adds a 1/2" UNF thread to most barrels.
No cutting or filing required.
The Parker-Hale screw thread adaptor slides over the barrel and clamps on tight, using different sized lugs to achieve the perfect fit.
Once in place, any 1/2" UNF threaded moderator can be fitted to your rifle.
Please Note: we do not sell silencers, you would need to go to your local gun shop.
Suitable for <12ft lbs airguns only.
- Ensure the gun is safe and unloaded.
- Remove foresight prior to assembly.
- Select the collet which is most suitable for the barrel (14mm, 15mm, or 16mm diameter).
- Push the adapter on to the barrel as far as possible (until firm resistance).
- Holding the cap, rotate the body clockwise to lock in place.
- Ensure the device is secure on the barrel.
CAUTION: As excessive tightening could choke the barrel.
Also available ~ Parker Hale Dual Male Adapter and Thread Guards.
You may also be interested in...
≡
Top