TITAN AIRGUN MAINSPRINGS
For a large range of air rifle makes and models.
TITAN XS MAINSPRING
No.10 ARE SOLD OUT
Size information shown below
Condition: New, in packaging
Round profile spring.
They will likely need cutting to fit, (guides on YouTube).
We only recommend you use a Gunsmith.
For over 30 years Titan Mainsprings have been supplied worldwide to airgun enthusiasts,
professional airgun customisers and the Gun Trade.
Only the finest quality Grade 1 Swedish Silicone Chrome Vanadium Spring Steel is used.
They use no mass production methods, each spring is hand wound to an exact specification,
then heat treated and tempered to ensure ultimate performance and maximum durability.
During final tempering, they are coated with a specially formulated hard, but flexible finish.
The almost friction-free operation of the Titan XS mainspring reduces the possibilities of
dieseling to a minimum and increases power by up to 40% for FAC rated air rifles.
Fitting this spring may take the rifle over the legal limit.
Replacing a mainspring is not a straight forward task and can cause serious injury to yourself or others.
We recommend you use the services of a professional gunsmith to change the mainspring.
After your new spring is installed, you will need to use an accurate chronograph,
to check it has not taken your rifle over the none FAC legal limit of 12ft/lbs.