ANT SUPPLIES LTD

Free postage and packaging, UK mainland.

ANT Supplies Banner Marching Ants

WEAVER / PICATINNY RISER RAILS

Long length one piece raiser rails.

Fits most flat top rifles to raise the rail for mounting various devices such as scopes, tactical lights, red dots and lasers etc.

'LONG' LENGTH WEAVER / PICATINNY RISER RAILS

Long Six Slot Length Basic Weaver Raiser Rail, Medium ProfileMEDIUM PROFILE ~ BASIC

£9.60p each or
£18.00p for two

Elevates ¾ of an inch / 19mm.
5 inches / 128mm long overall.

Weighs ~ 140 grams.
Long Fourteen Slot Length Deluxe Weaver Raiser Rail, Low ProfileLOW PROFILE

£14.40p each


Elevates 1/2 inch / 12mm.
5.75 inches / 145mm long overall.

Weighs ~ 130 grams.
Long Fourteen Slot Length Weaver Raiser Rail, Medium ProfileMEDIUM PROFILE
£16.80p each
£12.00p each


Elevates 3/4 inch / 19mm.
5.75 inches / 145mm long overall.

Weighs ~ 155 grams.
Long Fourteen Slot Length Weaver Raiser Rail, High ProfileHIGH PROFILE ~ ALPHA
£16.80p each
£12.00p each

Elevates 1 inch / 25mm.
5.75 inches / 145mm long overall.

Weighs ~ 172 grams.
Long Fourteen Slot Length Deluxe Weaver Raiser Rail, High ProfileHIGH PROFILE ~ OMEGA

£16.80p each

Elevates 1 inch / 25mm.
5.75 inches / 145mm long overall.

Weighs ~ 189 grams.
Condition: New

20mm wide rail for weaver or picatinny mount fittings.

With see-through channel.

High quality aluminium alloy construction with matt black anodised finish.

Easy and fast to install for a very sturdy hold from the knurled fixing nuts.

At the last time of testing (12/01/20) the low-profile riser wont accept SportsMatch Weaver / Picatinny mounts, they fit but not quite tightly enough.

The difference between the High Alpha and Omega:
The Omega is heavier, with larger thumb nuts, and both its clamping bolt shafts are not flattened.

Also available as mini and short to medium length raiser rails.

Top View of The Long Six Slot Length Basic Weaver Raiser Rail, Medium Profile

More info on the MEDIUM PROFILE BASIC risers;

They have one location pin on the base, so are more universal fitting then the other riser rails, which have two location bars (clamping bolt shafts) that have to line up and slot into the
receivers rails.

However the cross-cut sections are not as deep as the other risers,
so some accessories may not fit them.


Customer feedback: they fit Browning T-Bolt rifles (if already fitted with weaver bases).

Base View of The Long Six Slot Length Basic Weaver Raiser Rail, Medium Profile

LOW-PROFILE RAISER:

Base and Top View of The Long Fourteen Slot Length Deluxe Weaver Raiser Rails, Low Profile

MEDIUM AND HIGH PROFILE RAISERS:

They have location bars / bolt shafts with a spacing of 75mm from inner edge to edge.

Long Fourteen Slot Length Deluxe Weaver Raiser Rails, Medium and High Profile

The Medium and High Alpha profile raisers have one of the clamping bolt shafts flattened.

Base View of The Clamping Bolt Shafts on The Long Fourteen Slot Length Deluxe Weaver Raiser Rail, High Profile

Low, Medium and High Profile Long Fourteen Slot Length Deluxe Weaver Raiser Rails

You may also be interested in...
Top