ANTAC GUN BARREL CLEANING PATCHES
Barrel cloths for cleaning rod jag fittings.
ANTAC GUN BARREL PATCHES
Precut barrel cleaning patches.
They can easily cut again for various bore sizes.
If the patch is too large then cleaning the barrel will be difficult and the patch may jam, too small and full contact may not be made, leaving an imperfect clean.
Patch size rough guide (depends if jag or patch pull and patch thickness);
- 20mm x 20mm ~ .17cal to .22cal.
- 25mm x 25mm ~ .22cal to .27cal.
- 30mm x 30mm ~ .27cal to .30cal.
- 40mm x 40mm ~ .30cal to .38cal.
- 45mm x 45mm ~ .38cal to .45cal.
- 55mm x 55mm ~ .45cal to .50cal and .410, 16g.
- 75mm x 75mm ~ .50cal to .54cal and 12g, 28g.
Also available ~ UK Barrel Cleaning Jag Attachments and UK Barrel Cleaning Patch Puller Loops.
- ANTAC PATCHES:
Gun barrel pre-cut patches.
Ultra-absorbent.
Non-woven synthetic.- ANTAC DISC PATCHES:
Premium gun barrel patches.
Made from 50% polyester and 50% viscose.
Highly absorbent, soft and biodegradable.
50mm diameter.





The securely and fully cover the patch puller, pierce a hole roughly one third of the way in from the edge of the patch, push the patch puller through and then feed the patch through the loop:
