ANT SUPPLIES LTD
Free postage and packaging, UK mainland.
FIRING PIN BOLT TOOLS
For Ruger 77 / Rimrock bolt action rifle.
BOLT ACTION TOOLS FOR RUGER 77 / RIMROCK
Bolt action tool for Ruger 77 and Rimrock.
Offers a third hand for removing the firing pin from without lost parts or sore fingers.
Screw the firing pin assembly into the hollow shank, and tighten the threaded steel shank, to compress and capture the mainspring.
The hollow shank protects the firing pin tip, as it slides over the pin to compress the spring.
The cross pin can then be driven out with a pin punch, and then the spring tension reduced by slowly loosening the shank.
Should work with the following: Ruger M77 Mark II, 77/22, 77/17, 77/44 / Rimrock.
Instruction guides are available on YouTube.
- DISASSEMBLY TOOL
Main spring and firing pin tool remover.
To disassemble the striker from the firing pin and main spring.
Allows you to compress the spring to allow the retainer pin to be removed from cocking piece.
Also available ~ Remington Bolt Tools.
DISASSEMBLY TOOL:
