ANT SUPPLIES LTD

Free postage and packaging, UK mainland. ANT Supplies Banner Marching Ants

ADJUSTABLE SCOPE RINGS FOR DOVETAIL RAILS

SportsMatch UK Logo UK Animated Flag
Proudly made in the United Kingdom
*

SPORTSMATCH ADJUSTABLE SCOPE RINGS

ATP65ATP65 Sportsmatch Dovetail Rail Two Piece Fully Adjustable High Profile 25mm Diameter Scope RingsTWO PIECE ~ 25mm

£76.00p per pair

For 1" / 25mm diameter body tube rifle scopes.

Elevation ~ 26.5mm to 29mm.

Weight ~ 116 grams.

Adjustable for windage, elevation and height.
ATP61ATP61 Sportsmatch Dovetail Rail Two Piece Adjustable High Profile 30mm Diameter Scope RingsTWO PIECE ~ 30mm

£53.00p per pair

For 1 3/16 / 30mm diameter body tube rifle scopes.

Elevation ~ 22.5mm - 23.8mm.

Weight ~ 119 grams.

Adjustable for elevation and height.
ATP66ATP66 Sportsmatch Dovetail Rail Two Piece Fully Adjustable High Profile 30mm Diameter Scope RingsTWO PIECE ~ 30mm

£82.00p per pair

For 1 3/16 / 30mm diameter body tube rifle scopes.

Elevation ~ 25mm - 27.5mm.

Weight ~ 120 grams.

Adjustable for windage, elevation and height.
AOP55AOP55 Sportsmatch Dovetail Rail One Piece Fully Adjustable High Profile 25mm Diameter Scope RingsONE PIECE ~ 25mm

£40.00p each

For 1" / 25mm diameter body tube rifle scopes.

Elevation ~ 26.5mm.

Length ~ 110mm.

Weight ~ 196 grams.

Adjustable for windage and elevation.
AOP56AOP56 Sportsmatch Dovetail Rail One Piece Fully Adjustable High Profile 30mm Diameter Scope RingsONE PIECE ~ 30mm

£70.00p each

For 1 3/16 / 30mm diameter body tube rifle scopes.

Elevation ~ 25mm.

Length ~ 110mm.

Weight ~ 192 grams.

Adjustable for windage and elevation.
Condition: New, in packaging

Made in the United Kingdom.

Two piece, high-profile mounts.

Fits 9.5mm - 11.5mm wide dovetail rails.

Ring thickness ~ 21mm.

Double clamped, 21mm thick scope mounts for standard dovetail rifle rails.

Precision machined high grade aluminium alloy construction with a matte black finish.

Suits scopes with objective lenses up to 60mm diameter (on most rifles).

Allen key included for securing scope and mounting.

Does not include arrestor pin.


It is important that all the following instructions are followed in order for this product to function correctly.

Use the allen keys supplied in order for these products to function correctly and to avoid damage to your scope.

Prior to fitting ensure weapon is unloaded and made safe.
Max torque rating 25in/lbs.
All screws need checking for tightness periodically.


MORE INFORMATION ON THE FULLY ADJUSTABLE TWO PIECE MOUNTS:

Adjustable for windage, elevation and height.

Lateral position also adjustable for perfect dovetail centering.

The locking screws include an anti vibration coating, which locate into a hardened steel spigot to ensure no loss of zero.

Provides up to 75 MOA vertical adjustment.

ATP65, 65E, 66, 66E Fully Adjustable 2 Piece Fitting Instructions:

  1. Loosen screws (A) 1/4 turn then fit mounts and scope to rifle in the usual way.
  2. Re-tighten screws (A) firmly, shoot a five shot group at approximately 25 metres and measure vertical and lateral distance between the aiming point and actual point of impact.

Elevation Adjustment:

  1. Loosen screws (A) 1/4 turn (MUST BE BOTH MOUNTS).
  2. Loosen screw (B) above screw (C) 1/4 turn MAXIMUM (BOTH MOUNTS).
  3. The point of impact is adjusted by turning screw (C) on the rear mount.
    Clockwise to raise point of impact and anti-clockwise to lower, 1/4 turn is approximately 30mm at 25 metres.
  4. Re-tighten screws (B) firmly above screws (C).
  5. Re-tighten screws (A) firmly.
  6. Shoot another five shot group and repeat steps 1 to 5 if necessary.

Windage Adjustment:

  1. Loosen screws (A) (MUST BE BOTH MOUNTS).
  2. Point of impact is adjusted by loosening rear mount screw (B) 1/4 turn on one side only. i.e. turning the left hand screw (as viewed from rear of scope) anti-clockwise, will move point of impact to the right and vice versa. 1/4 turn is approximately 40mm at 25 metres.
  3. Tighten screw (B) on OPPOSITE side of rear mount firmly.
  4. Re-tighten screws (A) firmly.
  5. Shoot another five shot group and repeat steps 1 to 4 if necessary.
Sportsmatch Dovetail Rail Two Piece Fully Adjustable Scope Mount Guide

Please note: For instructional purposes, all adjustment references have been made using the rear mount only. If required the front mount can be adjusted in the same way.

Both front and rear mounts can also be adjusted laterally (simultaneously) to align with the centre line of the barrel, as well as vertically (simultaneously) to provide different heights.

The above figures are purely for guidance as individual rifle / scope / pellet combinations can cause considerable variations.

Final adjustments to point of impact should be made using the scope turrets.


MORE INFORMATION ON THE ELEVATION AND HEIGHT ADJUSTABLE TWO PIECE MOUNTS:

Adjustable for elevation and height.

Lateral position also adjustable for perfect dovetail centering.

The locking screws include an anti vibration coating, which locate into a hardened steel spigot to ensure no loss of zero.

Provides up to 75 MOA vertical adjustment.

ATP61 – 30mm Adjustable Elevation and Height Extra High Fitting Instructions:

  1. Easyfit recoil pin included.
  2. Fit mounts and scope to rifle in usual way and check adjuster locking screws (A) are securely tightened.
  3. Shoot a five shot group at approximately 25 yards, measure vertical distance from aiming point.
  4. To correct elevation loosen locking screws (A) on front and rear mount using 2.5mm allen key.
    Turn screw (B) clockwise to lift rear of scope using 2mm allen key (¼ turn = approx 22mm at 25 yards).
    Retighten locking screws (A) FIRMLY.
    To lower rear of scope undo locking screws (A), push down on top of rear mount and turn adjuster screw (B) anti-clockwise as required.
    Retighten locking screws FIRMLY.

    Note: Both front and rear mount adjusters can be used to lift scope evenly if required.

    Maximum adjustment is 2 turns which equals 1.3mm of full adjustment.
Sportsmatch Dovetail Rail Two Piece Adjustable Scope Mount Guide

MORE INFORMATION ON THE ONE PIECE MOUNTS:

Adjustable for windage and elevation.

The maximum amount of adjustment from one end of the mount to the other is 2mm (windage & elevation).

The locking screws include an anti vibration coating.

Provides up to 45 MOA vertical adjustment.

Ideal for long range shooting with high powered air rifles / rifles.

AOP55 / AOP56 - One Piece Adjustable Mount Fitting Instructions:

  1. This product includes an optional Recoil Arrestor Pin in the pack, which can be fitted in one of two positions.
    If the Recoil Arrestor Pin is required please refer to the FAQ section on Sportsmatch’s website for fitting instructions.
  2. Before fitting the mount check the windage adjusting screws (A), rear locking screws (B) and elevation locking screw (C) for tightness.
  3. Undo the side clamp screws (E) and attach the mount to the dovetails with the elevation adjusting screw (D) at the rear (butt) end.
    Please note the side clamp is reversible to suit a wide range of dovetail widths.
  4. Remove top cap screws (F) along with top caps and fit scope in desired position. re-fit top caps.
  5. Shoot a five shot group at approximately 30 yards (closer if necessary), using a large target.
    Measure distances vertically and horizontally from the aiming point.
  6. To correct elevation, remove mount complete with scope from the rifle.
    Undo both of the rear locking screws (B) approximately ½ turn.
    Loosen the elevation locking screw (C) approximately ¼ turn.
    Turn the elevation adjusting screw (D) to correct point of impact.
    Clockwise lowers point of impact and vice versa.
    Retighten elevation locking screw (C).
    Retighten both rear locking screws (B) evenly by ½ turn.
    Then re-fit mount complete with scope to dovetail.
    Repeat if necessary.
    Maximum adjustment anti-clockwise on the elevation adjusting screw (D) is 2½ turns.
  7. To correct windage, leave scope and mount on rifle.
    To move point of impact to RIGHT - turn right hand windage adjusting screw (A) at front of mount anti-clockwise.
    Then tighten opposite side windage adjusting screw (A).
    Check the rear locking screws (B).
    To move point of impact LEFT - turn left hand windage adjusting screw (A) at front of mount anti-clockwise.
    Then tighten opposite side windage adjusting screw (A).
    Check the rear locking screws (B).
    Repeat if necessary.
Sportsmatch Dovetail Rail One Piece Fully Adjustable Scope Mount Guide

The elevation (D) and windage (A) adjusting screws, move the point of impact approx:
1" @ 15 yards, 2" @ 30 yards, 5" @ 50 yards, with ¼ turn.

Important Adjuster screws (A) and locking screws (B) should be tightened firmly but not overtightened or damage to product may occur.

ATP65 Sportsmatch Dovetail Rail Two Piece Fully Adjustable High Profile 25mm Diameter Scope Rings
ATP61 Sportsmatch Dovetail Rail Two Piece Adjustable High Profile 30mm Diameter Scope Rings
ATP66 Sportsmatch Dovetail Rail Two Piece Fully Adjustable High Profile 30mm Diameter Scope Rings
AOP55 Sportsmatch Dovetail Rail One Piece Fully Adjustable High Profile 25mm Diameter Scope Rings
AOP56 Sportsmatch Dovetail Rail One Piece Fully Adjustable High Profile 30mm Diameter Scope Rings
A word on scope mounts...


You may also be interested in...
Top