TRUGLO SHOTGUN RIB BEADS
Shotgun rib fitting bead sights.
TRUGLO SHOTGUN GLO DOT BEAD SIGHTS
£14.40p each
SOLD OUT
The industry’s favourite bead replacement.
Fiber length is 0.5".
Available with 2.6mm or 3mm thread size.
Fiber diameter is .078".
£16.80p each
SOLD OUT
Largest diameter bead replacement.
Fiber length is 0.5".
Available with 2.6mm or 3mm thread size.
Fiber diameter is .120".
£33.60p each
SOLD OUT
Extremely low-profile.
Dual colour red and green together.
Fiber diameter is .120".
£33.60p per kit
SOLD OUT
Extremely low-profile.
Includes four interchangeable fibers optics.
Fiber diameter is .060".
Replaces your shotguns front sight.
High-quality all CNC-machined.
Quick target acquisition.
Helps eliminate problems with eye dominance.
Promotes shooting with both eyes open.
Extremely low–profile.
Easy and quick installation.
The Long-Beads and Fat-Beads are available with either 2.6mm or 3mm threads.
The Universal-Beads fit any rib width, as they include different diameter thread mounting screws and assorted sized clips to clamp onto the rib and eliminate twisting.
Designed ONLY to be installed on a shotgun barrel with a ventilated, or solid rib design.
Warning: Acetone, solvents, degreasers and abrasives damage the fiber-optic element.
Care must be exercised when cleaning the firearm to prevent damage to the sight.
Warning: Always make sure your firearm is unloaded and pointed in a safe direction.
A useful gun chart and models guide PDF file from TruGlo, but please
check with your guns manufacturer for the required thread type.
Also available ~ Standard Shotgun Rib Bead Sights.
LONG BEAD
INSTALLATION OF THE LONG AND FAT BEADS
1. Remove the existing bead from the rib.
2. Select the correct screw size by using the chart linked above, or by matching the removed bead. If the original bead is pressed into the rib, the hole will need to be tapped.
3. If necessary, us a small amout of thread lock.
Do Not Overtighten.
Choice of M2.6x0.45 or M3x0.50 threads.
FAT BEAD DUAL COLOUR
UNIVERSAL BEAD DUAL COLOUR
Endorsed by Ducks Unlimited.
FOR QUICK AND EASY INSTALLATION OF THE UNIVERSAL BEADS
1. Use the enclosed hardware pack to locate the correct 'clip' to fit your shotguns particular rib width.
2. Mount the specific 'clip' over the rib and secure the front sight cover 'clip'.
3. Install the front sight by replacing the front bead with enclosed threaded screw.
Please Note: Some Remington models use a pressed front bead, that requires removal/tapping.
UNIVERSAL BEAD
Endorsed by Ducks Unlimited.
This sight includes four interchangable fibers: